Items where Subject is "Engineering"

Article

Afuekwe, Austin and Bello, Kelani (2019) Use of Smart Controls in Intelligent Well Completion to Optimize Oil & Gas Recovery. Journal of Engineering Research and Reports, 5 (4). pp. 1-14. ISSN 2582-2926

Almalowi, Saeed J. and Jobran, Fatma A. (2022) Experimental Study of Design and Implementation of Small-Scale Biogas Digest System. Energy and Power Engineering, 14 (03). pp. 156-165. ISSN 1949-243X

Apte, Sayali Deepak and Sandbhor, Sayali and Kulkarni, Rushikesh and Khanum, Humera (2023) Machine learning approach for automated beach waste prediction and management system: A case study of Mumbai. Frontiers in Mechanical Engineering, 9. ISSN 2297-3079

Bose, D. and Basu, U. (2013) Unsteady Incompressible Flow of a Generalised Oldroyed-B Fluid between Two Infinite Parallel Plates. World Journal of Mechanics, 03 (02). pp. 146-151. ISSN 2160-049X

Ding, Weijie and Huang, Jin and Shang, Guanyu and Wang, Xuexuan and Li, Baoqiang and Li, Yunfei and Liu, Hourong (2022) Short-Term Trajectory Prediction Based on Hyperparametric Optimisation and a Dual Attention Mechanism. Aerospace, 9 (8). p. 464. ISSN 2226-4310

Djamaluddin, F. (2023) Finite element analysis and optimization of foam filled fender under quasi static and dynamic responses. Frontiers in Mechanical Engineering, 9. ISSN 2297-3079

Domogalla, Vincent and Bertsch, Lothar and Plohr, Martin and Stumpf, Eike and Spakovszky, Zoltán S. (2021) Low-Noise Design of Medium-Range Aircraft for Energy Efficient Aviation. Aerospace, 9 (1). p. 3. ISSN 2226-4310

Elechi, Promise and Orike, Sunny and Agugharam, Promise (2019) Analysis and Evaluation of Specific Absorption Rate of GSM Signal in Port Harcourt, Nigeria. Journal of Engineering Research and Reports, 5 (4). pp. 1-10. ISSN 2582-2926

Etim, Isemin Stephen and Umoette, Anyanime Tim and Ukommi, Ubong S. (2024) Comparative Performance Analysis of PID and Sliding Mode Controllers in Speed Control of Induction Motor Drives with Intermittent Loading. Journal of Engineering Research and Reports, 26 (10). pp. 93-106. ISSN 2582-2926

Ezeokonkwo, John U. and Ezeliora, Chukwuemeka D. and Mbanusi, Echefuna C. (2019) Statistical Analysis of Rice Husk Ash as a Construction Material in Building Production Process. Journal of Engineering Research and Reports, 5 (4). pp. 1-8. ISSN 2582-2926

Farag, Manal M. and Yamany, Magdy El- and Faried, A. S. and Sofi, W. H. (2020) Influence of Elevated Temperature on Concrete Properties Containing Natural Wastes Treated by Pyrolysis. Journal of Engineering Research and Reports, 19 (2). pp. 1-15. ISSN 2582-2926

Fei, Chengwei and Wen, Jiongran and Han, Lei and Huang, Bo and Yan, Cheng (2022) Optimizable Image Segmentation Method with Superpixels and Feature Migration for Aerospace Structures. Aerospace, 9 (8). p. 465. ISSN 2226-4310

Gao, Liang and Zhu, Yanhe and Liu, Yubin and Zhang, Junming and Liu, Benshan and Zhao, Jie (2022) Analysis and Control for the Mode Transition of Tandem-Wing Aircraft with Variable Sweep. Aerospace, 9 (8). p. 463. ISSN 2226-4310

Gutiérrez Teuler, Guillermo and Arnaldo Valdés, Rosa María and Gómez Comendador, Victor Fernando and López de Frutos, Patricia María and Rodríguez Rodríguez, Rubén (2022) Study of the Impact of Traffic Flows on the ATC Actions. Aerospace, 9 (8). p. 467. ISSN 2226-4310

Göktolga, M. Ugur and de Goey, Philip and van Oijen, Jeroen (2020) Modeling Temperature Variations in MILD Combustion Using MuSt-FGM. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Keke, Mabel and Nnanwube, Ikechukwu A. and Onukwuli, Okechukwu D. (2023) Overvıew of Bıoleachıng. Journal of Engineering Research and Reports, 25 (2). pp. 108-129. ISSN 2582-2926

Koike, Yuha and Yokoyama, Yoshiyuki and Hayakawa, Takeshi (2020) Light-Driven Hydrogel Microactuators for On-Chip Cell Manipulations. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Konate, Ramatou and Zouma, Bernard and Ouedraogo, Adama and Korgo, Bruno and Zoungrana, Martial and Kam, Sié (2022) Impact of the Thicknesses of the p and p+ Regions on the Electrical Parameters of a Bifacial PV Cell. Energy and Power Engineering, 14 (02). pp. 133-145. ISSN 1949-243X

Laissy, Mohamed and Ismaeila, Mohammed (2019) Strengthening Methods of the Existing Reinforced Concrete School Buildings in Medina, Saudi Arabia. Journal of Engineering Research and Reports, 5 (4). pp. 1-14. ISSN 2582-2926

Lei, Tao and Wang, Yanbo and Jin, Xianqiu and Min, Zhihao and Zhang, Xingyu and Zhang, Xiaobin (2022) An Optimal Fuzzy Logic-Based Energy Management Strategy for a Fuel Cell/Battery Hybrid Power Unmanned Aerial Vehicle. Aerospace, 9 (2). p. 115. ISSN 2226-4310

Mmonwuba, N. C. and Mmaduabuchi, Anaduaka and Azubuike, Ohamadike and Nzube Theophilus, Nweke and Chukwuemelie, Chioke (2023) The Effect of Industrial Waste Effluent on Waterquality: A Case Study of Otamiri River, Owerri, Imo State. Journal of Engineering Research and Reports, 24 (4). pp. 15-25. ISSN 2582-2926

Moreno, A. and Jr., E. Graycochea and Gomez, F. R. (2020) Wirebond Process Optimization through Stitch Relocation on QFN Package. Journal of Engineering Research and Reports, 19 (2). pp. 26-30. ISSN 2582-2926

Nazari, Reza and Ansari, Adil and Herrmann, Marcus and Adrian, Ronald J. and Kirian, Richard A. (2023) Numerical and experimental investigation of gas flow field variations in three-dimensional printed gas-dynamic virtual nozzles. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Ndefo, Mmasom Iruoma and Nwafor, Solomon Chibuzo and Udeze, Chidiebele C. and Akpeghagha, Oghenevwaire and Ugbe, Oluchi Christiana (2023) Performance Evaluation of Networks Using Gain Scheduling PID Networked Control System for Nonlinear Systems. Journal of Engineering Research and Reports, 25 (5). pp. 17-30. ISSN 2582-2926

Njogu, Paul and Ochieng, Francis Xavier and Ogembo, Benard and Ondimu, Stephen and Kanali, Christopher and Ronoh, Erick and Omondi, Daniel and Ndiritu, Hiram (2022) Mesophilic Process and Kinetics Studies of Selected Biomolecules as Potential Enhancers of Biomethanization of Cow Dung in an Anaerobic Tubular Batch Reactor. Energy and Power Engineering, 14 (03). pp. 147-155. ISSN 1949-243X

Nébié, Jacques and Zongo, Sidiki and C. Tubreoumya, Guy and S. Zongo, Augustin and Konkobo, Ilyassé and Bagré, Boubou and Diané, Ali and Daho, Tizane and W. Igo, Serges and Zeghmati, Belkacem and Béré, Antoine (2022) Performance Assessment of a Box Type Solar Cooker Using Jatropha Oil as a Heat Storage Material. Energy and Power Engineering, 14 (02). pp. 124-132. ISSN 1949-243X

Olabisi, Patrick O. and Ayeni, Gbenga (2023) Voltage Quality Analysis on Power Transmission Networks: A Case Study of 330kV Power Transmission Networks in Nigeria. Journal of Engineering Research and Reports, 25 (4). pp. 42-50. ISSN 2582-2926

Owolabi, Gbadebo and Odoh, Daniel and Odeshi, Akindele and Whitworth, Horace (2013) Occurrence of Dynamic Shear Bands in AISI 4340 Steel under Impact Loads. World Journal of Mechanics, 03 (02). pp. 139-145. ISSN 2160-049X

Owolabi, Gbadebo and Odoh, Daniel and Peterson, Alex and Odeshi, Akindele and Whitworth, Horace (2013) Measurement of the Deformation of Aluminum Alloys under High Strain Rates Using High Speed Digital Cameras. World Journal of Mechanics, 03 (02). pp. 112-121. ISSN 2160-049X

Pan, Lin and Shao, Jingkai (2020) A Novel Intelligent Shore-to-Ship Power Supply System Using Collaborative Motor Control. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Pulido, Jonathan C. and Jr., Edwin M. Graycochea and Gomez, Frederick Ray I. (2020) Elimination of Crumpled Leadframe Defect through Machine Sensor Enhancement. Journal of Engineering Research and Reports, 19 (2). pp. 16-19. ISSN 2582-2926

Ren, Bo and Jiang, Yu and Li, Hengnian and Jiang, Chunsheng (2022) Existence and Control of Special Orbits around Asteroid 4 Vesta. Aerospace, 9 (8). p. 466. ISSN 2226-4310

Salimon, Sunday Adeleke and Baruwa, Abiodun Aderemi and Amuda, Saheed Oluwasina and Adeleke, Hafiz Adesupo (2020) Optimal Placement and Sizing of Capacitors in Radial Distribution Systems: A Two-Stage Method. Journal of Engineering Research and Reports, 19 (2). pp. 31-43. ISSN 2582-2926

Shtein, Samson Mil’ and Asthana, Dhawal (2020) Design of Solar Blind Photodetectors for Communication with Green Signal (λ= 0.532µm) in Space. Part II. Journal of Engineering Research and Reports, 19 (2). pp. 20-25. ISSN 2582-2926

Szabo, Stanislav and Pilát, Marek and Makó, Sebastián and Korba, Peter and Čičváková, Miroslava and Kmec, Ľubomír (2021) Increasing the Efficiency of Aircraft Ground Handling—A Case Study. Aerospace, 9 (1). p. 2. ISSN 2226-4310

Tornabene, Francesco and Ceruti, Alessandro (2013) Free-Form Laminated Doubly-Curved Shells and Panels of Revolution Resting on Winkler-Pasternak Elastic Foundations: A 2-D GDQ Solution for Static and Free Vibration Analysis. World Journal of Mechanics, 03 (01). pp. 1-25. ISSN 2160-049X

Toumi, M. and Bouazara, M. and Richard, M. J. (2013) Development of Analytical Model for Modular Tank Vehicle Carrying Liquid Cargo. World Journal of Mechanics, 03 (02). pp. 122-138. ISSN 2160-049X

Viscor, Tor and Kamps, Landon and Yonekura, Kazuo and Isochi, Hikaru and Nagata, Harunori (2021) Large-Scale CAMUI Type Hybrid Rocket Motor Scaling, Modeling, and Test Results. Aerospace, 9 (1). p. 1. ISSN 2226-4310

Xiao, Lingfei and Sattarov, Robert R. and Liu, Peisong and Lin, Cong (2021) Intelligent Fault-Tolerant Control for AC/DC Hybrid Power System of More Electric Aircraft. Aerospace, 9 (1). p. 4. ISSN 2226-4310

Yalley, Peter P. and Appiadu-Boakye, Kennedy and Adzraku, Wisdom D. (2019) Assessing Qualities of Different Sources of Water for Mixing Concrete. Journal of Engineering Research and Reports, 5 (4). pp. 1-8. ISSN 2582-2926

Yamaguchi, Masafumi and Nakamura, Kyotaro and Ozaki, Ryo and Kojima, Nobuaki and Ohshita, Yoshio (2022) Loss Analysis of High-Efficiency Perovskite/Si Tandem Solar Cells for Large Market Applications. Energy and Power Engineering, 14 (04). pp. 167-180. ISSN 1949-243X