Influence of Variation in Tie Reinforcement Diameter on the Ductility of Reinforced Concrete Columns

Reinforced concrete columns are crucial structural elements in ensuring the strength and stability of buildings. Column ductility, which is the ability to absorb energy and undergo deformation before failure, is a primary concern in structural engineering, especially in extreme external loading situations such as earthquakes. This study aims to evaluate the influence of variation in Tie reinforcement diameter on the ductility of reinforced concrete columns using Xtract software. The research method involves creating column structure models with specified dimensions and specifications, followed by the gradual application of axial loads to each model. Three models were created with varying Tie reinforcement diameters, namely 10 mm, 12 mm, and 14 mm. Structural analysis was conducted to examine the structure's response to the applied axial and moment loads, including evaluation of stresses, deformations, and column capacities. The analysis results show differences in ductility levels among the models. The model with a 10 mm Tie reinforcement diameter achieves higher ductility levels at low axial loads but fails to meet the requirements at higher axial loads according to the SNI 1726:2019 standard. However, models with Tie reinforcement diameters of 12 mm and 14 mm also exhibit a similar pattern, with good ductility at low axial loads but failing to meet the requirements at higher axial loads. In conclusion, variations in Tie reinforcement diameter affect the ductility of reinforced concrete columns. To ensure full ductility under various axial load conditions, adjustments to the design or specifications of the reinforced concrete column structure are necessary. This research contributes to understanding the factors influencing the ductility of reinforced concrete columns and can serve as a basis for the development of more effective design methods in the future.